Schulungen Gersthofen
Training courses
from practice
Based on our know-how as a leading industrial service provider in Germany and the practical experience of our employees, we offer you various training courses - both at our Gersthofen site and at your premises.
Electrical explosion protection course
Compact course on explosion protection
Target group
- Plant managers, engineers, technicians, foremen, electrotechnically responsible persons, electrotechnically instructed and qualified persons, plant supervisors, operating personnel and craftsmen.
Contents
- 1-day training course Maintains the ability to carry out a proper, standard and regulation-compliant test before commissioning for electrical explosion protection.
- Theoretical background knowledge + practical implementation: Introduction to explosion protection Safe working in and near hazardous areas Overview of ignition protection types
- Labeling and selection of electrical devices
- Setting up in potentially explosive areas
- Removing the types of protection
- Maintenance and testing of systems in potentially explosive atmospheres
- Speaker: Alois Irl, R. STAHL Schaltgeräte GmbH
Location
- Gersthofen Industrial Park
Dates
- 14.05.2024 - 08.00 - 15.30
Costs
- 525 per participant includes the refresher course with documents, certificate of attendance and catering plus statutory VAT
- There are 20 training places available per day. Places will be allocated on receipt of this registration. The invoice will be sent to you immediately after the training course.
- Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place.
- If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Flyer
Risk assessment
Creation, maintenance, documentation - in accordance with relevant laws and regulations (ArbSchG, DGUV V1, ...)
Target group
- Managers - responsible for compliance with the Occupational Health and Safety Act
- Works councils
- All employees working in occupational health and safety in the company
Contents
- 1-day training course
- The participants gain an insight into the legal significance and the creation of a risk assessment.
- In a practical part, the acquired knowledge is directly implemented and an initial risk assessment is created.
- Basics of risk assessment according to ArbSchG
- Use of the regulations in the preparation of risk assessments
- The 7 steps of the risk assessment
- Types of risk assessment (ArbSchG, GefStoffV, LMRA)
- Carrying out a risk assessment using an example (practical part)
- Documentation of the risk assessment
- You will gain knowledge about hazards on machines and systems, as well as hazardous substances or work systems.
Speaker
- Rainer Stadler, Bilfinger Engineering & Maintenance GmbH
Location
Gersthofen Industrial Park
Dates
- 16.05.2024 // 8.00 a.m. - 5.00 p.m.
- 21.11.2024 // 8.00 a.m. - 5.00 p.m.
Costs
- 400 € per participant
- includes the training, documents and certificate of attendance, plus VAT.
- A minimum number of 6 participants is required for the training course to take place.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Flyer
Instruction for qualified electricians
Recurring instruction for company electricians
Target group
- Mandatory instruction of electricians in accordance with DGUV regulations 1 and 3
- All qualified electricians and electrically instructed persons must be instructed at least once a year on the dangers of electrical energy.
- Persons who have not been instructed may not carry out any work (repair, install, plan, test, etc.) on electrical equipment and systems.
Contents
- Refresher of the basics and innovations from last year
- The training is based on the "DGUV Regulation 1 - Principles of Prevention" and "DGUV Regulation 3 - Electrical Systems and Equipment"
Speaker
Stefan Schulz, Bilfinger Engineering & Maintenance GmbH
Dates
- Tuesdays and Thursdays, 09:15 to 12:45 :
- 21.03.24
- 18.04.24
- 14.05.24
- 18.07.24
- 26.09.24
- 08.10.24
- 07.11.24
- 12.12.24
- In-house training by arrangement
Costs
- 265 € per participant
- includes the training, documents and certificate of attendance, plus VAT.
- A minimum of 5 participants is required for the training to take place.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Flyer
Crane operators - initial training
Initial training to acquire knowledge and skills for operating cranes
Target group
- Persons with manual mechanical training
- Persons who are to operate bridge, gantry or pillar jib cranes
- Prerequisite: minimum age 18 years, health suitability (spatial vision, good hearing, if possible examination according to G 25), sufficient knowledge of the German language
Contents
- 1.5 day training course
- Legal regulations and requirements of the employers' liability insurance association
- Accident prevention regulations, operating instructions, safety rules
- Types, assemblies and safety equipment of cranes
- Personal protective equipment
- Handling loads, working with load charts
- Principles of slinging and hand signals
- Visual inspections and functional tests
- Behavior in the event of faults
- Practical exercises
- Theory test and individual practical test
Benefit
- Health and safety of your employees
- Recognizing the dangers of handling cranes
- Legally compliant training of employees in handling cranes
Speaker
Robert Kraffczyk, Bilfinger Engineering & Maintenance GmbH
Location
Gersthofen Industrial Park
Dates
- 1st day from 8.00 a.m. - 3.30 p.m. & 2nd day from 8.00 a.m. - 12.00 p.m.
- 19. - 20.03.24
- 11. - 12.06.24
- 17. - 18.09.24
- 10. - 11.12.24
- In-house training by arrangement
Costs
- 350 € per participant
- includes training, documents, certificate of attendance and personal crane operator card, plus VAT.
- A minimum number of 6 participants is required for the training to take place.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Flyer
Operator of cranes and slings
Annual instruction
Target group
- Persons with manual mechanical training
- Persons who are to operate bridge, gantry or pillar jib cranes
- Prerequisite: Minimum age 18 years, health suitability (spatial vision, good hearing, if possible examination according to G 25), sufficient knowledge of the German language
- The participants have already received initial training in handling cranes.
Contents
- 1.5 h training
- Refreshing the knowledge from the initial training
- Instruction in accordance with the current DGUV regulations and legal requirements
- Clarification of legal and technical innovations
Benefit
- Benefits:
- Health and safety of your employees
- Recognize the dangers of handling cranes
- Legally compliant instruction of employees in handling cranes
Speaker
- Robert Kraffczyk, Bilfinger Engineering & Maintenance GmbH
Locations
Gersthofen Industrial Park
Dates
- 14.06.2024 from 7 a.m. to 8.30 a.m.
- 20.09.2024 from 7 a.m. to 8.30 a.m.
- 13.12.2024 from 7 a.m. to 8.30 a.m.
Costs
- 45 EUR per participant
- includes the training, documents and certificate of attendance, plus VAT.
- A minimum number of 6 participants is required for the training to take place.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Flyer
Operators of lifting platforms - initial training
Initial training to acquire the knowledge and skills to operate lifting platforms
Target group
- Persons with technical mechanical training
- Persons who are to operate lifting platforms
- Prerequisite: minimum age 18 years, health suitability (spatial vision, good hearing, if possible examination according to G 25), sufficient knowledge of the German language
Contents
- 1-day training course
- Legal conditions
- Accident prevention regulations
- Operating instructions
- Safety rules
- Personal protective equipment
- Types and assemblies of aerial work platforms
- Signaling and safety devices, emergency shutdown, emergency lowering
- Visual inspections, functional tests
- Acceptance, testing, test logbook
- Behavior in the event of accidents, malfunctions and power surges
- Stability, travel movement, permissible operating speed
- Working on public roads, embankments and bodies of water
- Transportation on the road
- Passenger transportation
- Practical exercises
- Theory test
- Individual practical test
Benefit
- Health and safety of your employees
- Recognizing the dangers of handling lifting platforms
- Legally compliant training of employees in the use of lifting platforms
Speaker
- Robert Kraffczyk, Bilfinger Engineering & Maintenance GmbH
Location
Gersthofen Industrial Park
Dates
- In each case from 8.00 a.m. to 3.30 p.m.
- 21.03.24
- 13.06.24
- 19.09.24
- 12.12.24
- In-house training by arrangement
Costs
- 210 € per participant
- includes the training, documents and certificate of attendance, plus VAT.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as "substitutes" at any time.
Annual forklift instruction
Recurring instruction for forklift truck drivers
Target group
- Persons with manual mechanical training
- Persons who operate or are to operate forklift trucks
Prerequisite
- Minimum age 18 years,
- health suitability (spatial vision, good hearing, if possible examination according to G 25),
- sufficient knowledge of the German language,
- participants should already be trained in handling forklifts.
Contents
- 1-hour training
- Instruction in accordance with the current DGUV regulations and legal requirements
Locations
- Gersthofen Industrial Park
Dates
- 25.09.2024 from 1 p.m. to 2 p.m.
- 23.10.2024 from 1 p.m. to 2 p.m.
- 27.11.2024 from 1 pm to 2 pm
- In-house training by arrangement
Speaker
- Rainer Stadler (occupational safety specialist), Bilfinger Engineering & Maintenance GmbH
Flyer
Benefit
- Health and safety of your employees
- Recognize the dangers of handling forklift trucks
Costs
- 45 EUR per participant
- includes the training and certificate of attendance, plus VAT.
- A minimum number of 6 participants is required for the training to take place.
- The invoice will be sent to you immediately after the training course. Your registration is binding (there are no additional costs for substitute participants). This registration does not entitle you to a training place. If you cancel up to 4 weeks before the training date, you will not incur any costs. Thereafter, we will charge 30% of the training costs up to one week before the date and the full amount thereafter. You can nominate other participants as “substitutes” at any time.
Registration
The training courses can also be requested flexibly from us. We create individual offers for all customers and also carry out training courses off-site .
